WOOdman DeathGrip TCDB Doppel Sattelklemme
WOOdman DeathGrip TCDB Doppel Sattelklemme
Maximiert jedes Gramm Material, um die ultimative Mischung aus Leichtgewicht und Klemmkraft zu schaffen. Mit 20 mm Klemmhöhe und doppelten Schrauben kann diese Sattelstützenklemme ausreichend angezogen werden, ohne zu viel Drehmoment. Oder sie kann auf dieselbe Drehmomentangabe für die doppelte Stärke angezogen werden. Entwickelt für Carbon-Sattelstützen und die meisten Carbon-Rahmen.
Bitte beachten Sie, dass zur Bestimmung der Sattelstützklemmengröße der Außendurchmesser des Sitzrohrs an Ihrem Fahrradrahmen gemessen werden sollte, nicht der Sattelstütze.
MATERIALIEN：
CNC-gefräste hochwertige 6061 T6 Aluminiumklemme
Präzisionsgefertigte hochwertige Titan-Schrauben oder optionale Edelstahl-Schrauben.
KLEMMHÖHE：
20mm (Klemmhöhe 19mm)
DURCHMESSER：31,8 mm, 34,9 mm
FARBEN：Schwarz, Blau, Titan, Rosa, Orange, Rot, Zinn, Gold
GEWICHT：
Titan-Schrauben 31,8 mm：20,3 g
Titan-Schrauben 34,9 mm：24,3 g
Edelstahl-Schrauben 31,8 mm：24 g
Edelstahl-Schrauben 34,9 mm：27 g
Both my steel and titanium frames never lock the seatpost enough. I have a cheap dual clamp for my steel frame (one bolt on frame, one bolt on saddle which I like, but they don't exist in the 34.9mm outer / 27.2mm seatpost inner configuration, so I opted for this quite expensive collar!
Works well but 4 stars for not having rotating nuts. Hopefully in the next iteration...?
Took care of seatpost slip on my stainless Otso Fenrir, recommended for anyone with the same issues.
My Seatpost on my new bike was sliding down and it was so annoying. Your clamp stopped the problem. Thanks for a great product plus it’s beautiful.
I tightened the clamp to 3nm on both bolts and have ridden 290 miles since without any slippage. That post is locked in. Be sure to clean up your seat post and apply carbon paste)lube (the gritty stuff) before clamping. Very happy with this purchase.
This double-bolt seat clamp solved a problem both my wife and I were having on our bikes. Tightened to the full 6 Nm the single-bolt seat clamps that came with our bikes wasn't enough to keep our seat posts from slipping down. These double-bolt seat clamps, each bolt tightened to 3 Nm, has fixed the problem! Using these you do want to tighten each bolt a little bit at a time until they are both equally and fully tight. In the picture below, the tape on the seat post hasn't budged after hundreds of bumpy miles, which is, sadly, more than I can say for the single-bolt Wolf Tooth seat post clamp that came with the bike.
Both my steel and titanium frames never lock the seatpost enough. I have a cheap dual clamp for my steel frame (one bolt on frame, one bolt on saddle which I like, but they don't exist in the 34.9mm outer / 27.2mm seatpost inner configuration, so I opted for this quite expensive collar!
Works well but 4 stars for not having rotating nuts. Hopefully in the next iteration...?
Took care of seatpost slip on my stainless Otso Fenrir, recommended for anyone with the same issues.
My Seatpost on my new bike was sliding down and it was so annoying. Your clamp stopped the problem. Thanks for a great product plus it’s beautiful.
I tightened the clamp to 3nm on both bolts and have ridden 290 miles since without any slippage. That post is locked in. Be sure to clean up your seat post and apply carbon paste)lube (the gritty stuff) before clamping. Very happy with this purchase.
This double-bolt seat clamp solved a problem both my wife and I were having on our bikes. Tightened to the full 6 Nm the single-bolt seat clamps that came with our bikes wasn't enough to keep our seat posts from slipping down. These double-bolt seat clamps, each bolt tightened to 3 Nm, has fixed the problem! Using these you do want to tighten each bolt a little bit at a time until they are both equally and fully tight. In the picture below, the tape on the seat post hasn't budged after hundreds of bumpy miles, which is, sadly, more than I can say for the single-bolt Wolf Tooth seat post clamp that came with the bike.
